Wuxi remote monitoring Common in the market wireless network Most cameras are equipped with WIFI. Before installation, they are connected to the computer with an Internet cable, and the IP address is configured. After that, there is no need to connect to the Internet cable. They can be connected through wireless routing within the coverage range. If there is no wireless route, you still need to use the network cable.
1. Monitor the wireless network video camera Connect to with network cable Router (with network), connect the antenna, and then connect the power supply. After powering on, check whether the network indicator light (orange) (green) next to the network jack lights up normally. If it is normal, the machine will perform self inspection.
2. Monitoring camera WIFI setting.
3. Click "Please click here to add a camera" on the screen, and the window to add a camera will pop up.
Method 1: Input the UID in the text box under the device ID or directly press the "Scan" button to scan. Scan the mobile phone scan box against the barcode. When the "beep" sounds, the scan is successful. Then the camera UID will appear in the device ID bar.
Method 2: Click "Search" and the camera will be found in the same LAN.
4. When the surveillance camera displays "Online", click the gear on the right side of the camera, enter the modification page of the surveillance camera, and click "WIFI Settings".
Select the router to be connected in the list, enter the WIFI password of the router, and then complete the WIFI setting. You can unplug the network cable of the camera and wait for the camera to restart and connect to WIFI.
5. After completing the above steps, the software remembers the ID of the device, so it can use the wireless WIFI network to monitor the mobile computer program without adding another one.
