1) Control center design
The monitoring center shall be set as a restricted area, with protective measures to ensure its own safety and communication means for internal and external communication, and shall be equipped with an emergency alarm device and a communication interface reserved for alarm to the superior alarm reception center.
The area of the monitoring center should match the size of the security system, and should not be less than 20 ㎡. There should be corresponding auxiliary facilities to ensure the normal work of the personnel on duty.
The indoor floor of the monitoring center shall be anti-static, smooth, flat and dust-free. The width of the door shall not be less than 0.9m and the height shall not be less than 2.1m.
The temperature in the monitoring center should be 16~30 ° C, and the relative humidity should be 30%~75%.
There should be good lighting in the monitoring center.
The laying of indoor cables and control lines should be equipped with ground trough; When no ground trough is set, it can also be laid in cable rack trough, cable corridor, wall trough, or raised floor.
The monitoring center shall be set as a restricted area, with protective measures to ensure its own safety and communication means for internal and external communication, and shall be equipped with an emergency alarm device and a communication interface reserved for alarm to the superior alarm reception center.
The area of the monitoring center should match the size of the security system, and should not be less than 20 ㎡. There should be corresponding auxiliary facilities to ensure the normal work of the personnel on duty.
The indoor floor of the monitoring center shall be anti-static, smooth, flat and dust-free. The width of the door shall not be less than 0.9m and the height shall not be less than 2.1m.
The temperature in the monitoring center should be 16~30 ° C, and the relative humidity should be 30%~75%.
There should be good lighting in the monitoring center.
The laying of indoor cables and control lines should be equipped with ground trough; When no ground trough is set, it can also be laid in cable rack trough, cable corridor, wall trough, or raised floor.
The area, temperature, humidity, daylighting and environmental protection requirements, self-protection capability, equipment configuration, installation, control operation design, man-machine interface design, etc. of the monitoring center (control room) shall comply with the principles of ergonomics.
The monitoring center shall be equipped with a grounding collecting ring or collecting bar. The collecting ring or collecting bar should be made of bare copper wire, and its sectional area should not be less than 35mm2.
The system monitoring center and important equipment of the system shall be equipped with corresponding standby power supply devices.
The monitoring center of the safety protection system shall be equipped with a special distribution box, and the distribution circuit of the distribution box shall have margin.
