Wuxi remote monitoring Installation of
1. Switch on the monitoring host and video camera Power supply, adjust the camera angle to a predetermined range through the monitor, and adjust the focal length and definition of the camera lens to enter the adjustment process of video equipment and other control equipment
2. If there is much dust outdoors or indoors, the camera shield needs to be installed. After the second step, the shield can be installed directly from here.
3. Take out the camera and lens, carefully install the lens according to the camera lens model and specification determined in advance (infrared camera and integrated camera do not need to install the lens), take care not to touch the lens and CCD (the part marked in the figure) with your hands, after confirming that they are firmly fixed, connect the power source, connect the host or use the monitor on site For small TV sets, adjust the aperture and focus.
4. Insert the BNC plug of the welded video cable into the socket of the video cable (align the two notches of the plug with the two fixing posts of the video socket of the camera, and rotate clockwise after insertion), and confirm that it is firmly fixed and in good contact.????
5. Take out the support and prepare tools and parts: expansion plug, screw, screwdriver, hammer, electric drill and other necessary tools; According to the predetermined installation position, check the size and model of the expansion plug and self tapping screw, test whether the screw port of the bracket screw and the camera base is suitable, whether the embedded pipeline interface is properly handled, and whether the cable is unblocked. Enter the installation procedure after it is ready.
6. Connect the other end of the cable to the video input port of the control host or monitor (TV) in the same way to ensure firm and good contact. (If you use a picture splitter, video distributor and other back-end control equipment, please refer to the wiring method of specific products)
7. Insert the power output plug of the power adapter into the power socket of the surveillance camera and confirm its firmness (pay attention to the power requirements of the camera: 500-800mA12V power supply is generally used for ordinary gun cameras, 1000-2000mA12V power supply is used for infrared cameras, please refer to the product description to select suitable products).
8. Take out the support, expansion plug, screw, screwdriver, small hammer, electric drill and other tools, and install the support according to the predetermined position. After checking the firmness, install the camera in the agreed direction; (Before determining the mounting bracket, it is better to power on the mounting position for testing to obtain more reasonable monitoring effect)
Wuxi Dehang Technology Co., Ltd Provide professional IT services, broadcast system, projector installation, monitoring engineering, network maintenance, Security monitoring , wiring engineering, monitoring installation, Monitoring installation company , LAN cabling, IT outsourcing, network maintenance, generic cabling system, generic cabling company, monitoring installation company, etc.
