install Wuxi remote monitoring video camera Method of
In fact, the installation of Wuxi remote monitoring camera is very simple and easy. Generally, it is only necessary to install the camera in the correct position and connect the signal cable and power supply. However, if we cannot correctly install the camera and adjust the state of the camera at the same time, we cannot achieve the desired effect. At this time, pay attention to the camera lens interface!
Wuxi remote monitoring camera installation method:
1) Installation height of monitoring camera: indoor ground distance shall not be less than 2.5m; Outdoor is controlled at 3.5m;
2) The installation of the monitoring camera and its supporting devices should be firm, and attention should be paid to damage prevention;
3) In case of electromagnetic interference, the installation of monitoring camera shall be isolated from the ground;
4) The signal line and power line of the monitoring camera shall be introduced separately;
Wuxi remote monitoring camera installation PTZ and decoder:
1) The PTZ shall be installed firmly without shaking;
2) Check whether the rotation angle range of the PTZ meets the requirements;
3) The decoder shall be installed near the PTZ or in the ceiling!
Wuxi remote monitoring camera control equipment installation:
1) All cables in the control room shall be provided with cable trough and inlet hole according to the equipment installation position, arranged, bound neatly, numbered and permanently marked;
2) The installation position of the console and cabinet (rack) shall meet the design requirements, and the installation shall be stable, firm and convenient for operation and maintenance. The clear distance from the back and side of the cabinet rack to the wall shall meet the maintenance requirements;
3) The installation of all control, display, recording and other terminal equipment of Wuxi remote monitoring camera shall be stable and easy to operate!
