Give Way Wuxi Security Monitoring Better transmission performance of equipment
In wireless Security monitoring In the process of building the system, there are many times when the expected transmission effect cannot be achieved. Many unprofessional engineers will first think that the wireless Wuxi security monitoring equipment is not strong enough, which is not comprehensive. More often, the unstable transmission of the wireless security monitoring system is due to the failure to do some detailed work during the installation process. Today we will learn how to make the wireless security monitoring equipment play a better transmission performance.
1. Performance of wireless security monitoring equipment: As an important transmission equipment in the wireless monitoring system, the performance of the wireless security monitoring equipment itself is crucial. A wireless monitoring device with poor performance will inevitably cause problems such as low signal strength, sometimes no signal, collapse, and so on, no matter how much trouble and attention it takes. Therefore, it is recommended that industrial quality wireless security monitoring equipment should be selected for outdoor wireless security monitoring system.
2. Whether the transmission environment is blocked: blocking is an important factor affecting the transmission effect of wireless monitoring. Therefore, before building the wireless monitoring system, it is necessary to do a good job in the field transmission scheme planning, and use effective methods to avoid obstructions to ensure the stable transmission of signals.
3. Power supply problem. Since wireless monitoring projects are generally in the field environment, how to supply power is a big problem for engineering companies. For professional engineers, POE power supply or solar power and wind solar complementary power supply systems are generally used to meet the power demand of wireless monitoring systems.
4. Ensure sufficient transmission bandwidth: As we all know, the wireless security monitoring equipment can adopt the way of multiple sending and receiving, and the point-to-point transmission after multiple signals are centralized. It is worth noting that the bandwidth, memory and flash memory should meet the requirements of multiple sending and receiving when multiple sending and receiving. If the bandwidth of the wireless bridge is exceeded, the transmission image must be unstable.
5. Waterproof and lightning protection: although the industrial wireless security monitoring equipment itself has waterproof and dust-proof functions. However, it is necessary to do a good job of waterproof at the joints to prevent rainwater from flowing back into the equipment with the network cable in bad weather, affecting the normal operation of the equipment. Lightning protection is also indispensable. Lightning is a fatal blow to any electronic equipment. Generally, when the wireless security monitoring system is built, many customers will do a good job in preventing direct lightning strikes, while ignoring the prevention of inductive lightning. Lightning protection device can not only prevent inductive lightning, but also prevent damage to wireless bridge caused by static electricity.
