How to view remote monitoring through the Internet
1、 Embedded Digital Video Recorder Set Remote
1. First, prepare the applied peanut shell dynamic domain name, which can be registered on the official peanut shell website Then input the applied domain into the DVR (there is a dynamic DNNS login in the network settings). Now generally, DVRs have a DNNS login interface.
2. Set port number: in Router Map ports in the (take UPC for example, which can be added under the forwarding rules). Generally, there are three pin ports: 1. The network port defaults to 80 ports; 2. The remote image transmission port; 3. The remote playback port.
3. You can see the port number in the network settings of the DVR.
2、 Video capture card
1. The video capture card is a board installed in the computer host. The video capture card also uses a dynamic domain name. Open the monitoring software and click the system settings (this will not be described in detail, because the boards produced by each manufacturer are different, so the interface and settings will be different.)
2. Pin number setting: map ports in the router (for example, it can be added under forwarding rules). Generally, there are three pin ports 1: network port, default 80 port 2: remote image transmission port.
3: Remote playback port. The port number can be seen in System Settings - Network Settings under the monitoring software.
Wuxi Dehang Technology Co., Ltd. provides professional IT services, broadcasting system, projector installation, monitoring engineering, network maintenance, Security monitoring , cabling engineering, monitoring installation, monitoring installation company, LAN cabling, IT outsourcing, network maintenance, generic cabling system, generic cabling company, monitoring installation company, etc.
